Building Structure

Project 1

For this project, in a group of 5 members, we need to select the design of one of the members in studio 3. Working in a group, we are required to re-design the roof of that building by using truss designs. By using any material of our choice, we construct the model of our design. The size of the model must be appropriate to fit well on an A2 baord. 

Project 2

This project, it is divided into two parts, first part should be done in a group while the second part is an individual work.

Part 1 – 15% (Group components)

Working in a group of 3 members, each group is to design a 2 storey bungalow which consist of the following components:

1. 1 master bedroom with attached bathroom

2. Minimum 3 bedrooms

3. 2 bathrooms

4. Kitchen

5. Living hall

6. Dining area

7. 1 store room.

​

Part 2 – 25% (Individual components)

Each student is required to:

1. To analysis minimum 6 beams (each beam must subject to different types of load, i.e. UDL from one or more than one slabs, beam with point load(s) or combination of UDL and PL)

2. To analysis minimum 3 columns (from roof to foundation level)

Final Report